ZE450421
"Platinum" Universal Clutch Lever
"Platinum" Universal Clutch Lever
Universal clutch lever with “hot-start” 4 stroke
• Adjustable lever position provides the best lever position without adjusting the clutch cable
• Comes with CNC machined and anodized quick clutch cable adjuste
• Built-in return spring in the Platinum lever allows the lever to swing forward in the event of crash and prevents lever breakage
• Nylon sleeve placed between the clamp and handlebar allows the perch to rotate upon...
PT02275
Reactor 2 Evolution boy chest protector
Reactor 2 Evolution boy chest protector
• Reactor 2 Evolution is specifically projected for the assemblage of the rigid neck protector
• Extremely light and anatomically-designed
• Reactor is provided with a special up-and-over system (Flex System) titling both the front and the back parts when necessary, to grant total
freedom of movement
• It is particularly suitable for cross and enduro
Made in Italy
CE Approved
HE007
Warrior "The Alien" Helmet
Warrior "The Alien" Helmet
Homologation E11 - 22R-050158/8
Warrior H1 Helmet by Ufo Plast is a product MADE ENTIRELY IN ITALY. Achieved after long and attentive research resulting in better protection, and can be used in combination with the modern Neck Brace. When planning this helmet particular importance was given to the internal comfort, (fit and ventilation system), to the aggressive and aerodynamic design and to reduced weight. Conceived, realized and optimized for maximum performance with optimum...
GI02021
“LIMITED” Knee-shin guards
“LIMITED” Knee-shin guards
Internal embossed to increase air flow
Made in Italy
CE Approved
Warrior "STORM" Helmets
CODICE
HE011
COLOURS
B
SIZES
XS - S - M - L - XL - XXL
Homologation E11 - 22R-050158/8
Warrior H1 Helmet by Ufo Plast is a product MADE ENTIRELY IN ITALY. Achieved after long and attentive research resulting in better protection, and can be used in combination with the modern Neck Brace. When planning this helmet particular importance was given to the internal comfort, (fit and ventilation system), to the aggressive and aerodynamic design and to reduced weight. Conceived, realized and optimized for maximum performance with optimum comfort.
For maximum comfort the exterior shell has been constructed in two different sizes and made with the most advanced constructive technology. Different materials have been layered and woven together (Carbon, Aramidic, Fiberglass and Polyester Resin) and inserted in preestablished positions to guarantee the characteristic profile and maximum performance with minimum weight. The particular shape of the inferior shell was studied so as to reduce angles that could collide with the rider’s body and to permit the use of the modern Neck Brace. The visor is fastened and adjusted by 4 anodized aluminium screws.
Warrior H1 Helmet by Ufo Plast has been constructed with a complex ventilation system: the Multi Vent System (M.V.S.). Positioned towards the front are numerous air vents that direct fresh air to the skull, the interior in EPS is canalized for a perfect distribution of the airflow. As heat builds up inside the helmet it is dissipated by 3 vents on the upper part of the helmet which are capable of extraction even with a low flow of air and by two large vents located towards the lower back of the helmet. This guarantees complete air circulation.
Realized in the finest materials the pads are fastened to the helmet with snaps and can be completely removed. There are three pads: central pad, left side pad, right side pad.
Warrior H1 Helmet by Ufo Plast is a product MADE ENTIRELY IN ITALY. Achieved after long and attentive research resulting in better protection, and can be used in combination with the modern Neck Brace. When planning this helmet particular importance was given to the internal comfort, (fit and ventilation system), to the aggressive and aerodynamic design and to reduced weight. Conceived, realized and optimized for maximum performance with optimum comfort.
For maximum comfort the exterior shell has been constructed in two different sizes and made with the most advanced constructive technology. Different materials have been layered and woven together (Carbon, Aramidic, Fiberglass and Polyester Resin) and inserted in preestablished positions to guarantee the characteristic profile and maximum performance with minimum weight. The particular shape of the inferior shell was studied so as to reduce angles that could collide with the rider’s body and to permit the use of the modern Neck Brace. The visor is fastened and adjusted by 4 anodized aluminium screws.
Warrior H1 Helmet by Ufo Plast has been constructed with a complex ventilation system: the Multi Vent System (M.V.S.). Positioned towards the front are numerous air vents that direct fresh air to the skull, the interior in EPS is canalized for a perfect distribution of the airflow. As heat builds up inside the helmet it is dissipated by 3 vents on the upper part of the helmet which are capable of extraction even with a low flow of air and by two large vents located towards the lower back of the helmet. This guarantees complete air circulation.
Realized in the finest materials the pads are fastened to the helmet with snaps and can be completely removed. There are three pads: central pad, left side pad, right side pad.
Product IMAGES
Follow us on
