MG04358
"ECLIPSE" Made in Italy Jersey
"ECLIPSE" Made in Italy Jersey
Technical features:
• 100% polyester
• Many zone of vented material to guarantee the maximum ventilation
MADE IN ITALY
PP01219
License Plate holder with LED light
License Plate holder with LED light
License Plate holder with LED light
(E11 & DOT approved)
GI02021
“LIMITED” Knee-shin guards
“LIMITED” Knee-shin guards
Internal embossed to increase air flow
Made in Italy
CE Approved
PS02298
DRIFT back support for adult (medium size)
DRIFT back support for adult (medium size)
DRIFT back support for adult: Size indicated for rider with height under mt 1,70
Back support "Drift" with body belt. Removable straps. Made with breathable material such as polyester mesh and Airnet, and ensures maximum breathability and light weight with the advantage of high elasticity for shock absorption protections guaranteed by the internal ATF protections (fully removable for washing).
• Available in 3...
Warrior "The Alien" Helmet
CODICE
HE007
COLOURS
K
SIZES
XS - S - M - L - XL - XXL
Homologation E11 - 22R-050158/8
Warrior H1 Helmet by Ufo Plast is a product MADE ENTIRELY IN ITALY. Achieved after long and attentive research resulting in better protection, and can be used in combination with the modern Neck Brace. When planning this helmet particular importance was given to the internal comfort, (fit and ventilation system), to the aggressive and aerodynamic design and to reduced weight. Conceived, realized and optimized for maximum performance with optimum comfort.
For maximum comfort the exterior shell has been constructed in two different sizes and made with the most advanced constructive technology. Different materials have been layered and woven together (Carbon, Aramidic, Fiberglass and Polyester Resin) and inserted in preestablished positions to guarantee the characteristic profile and maximum performance with minimum weight. The particular shape of the inferior shell was studied so as to reduce angles that could collide with the rider’s body and to permit the use of the modern Neck Brace. The visor is fastened and adjusted by 4 anodized aluminium screws.
Warrior H1 Helmet by Ufo Plast has been constructed with a complex ventilation system: the Multi Vent System (M.V.S.). Positioned towards the front are numerous air vents that direct fresh air to the skull, the interior in EPS is canalized for a perfect distribution of the airflow. As heat builds up inside the helmet it is dissipated by 3 vents on the upper part of the helmet which are capable of extraction even with a low flow of air and by two large vents located towards the lower back of the helmet. This guarantees complete air circulation.
Realized in the finest materials the pads are fastened to the helmet with snaps and can be completely removed. There are three pads: central pad, left side pad, right side pad.
Warrior H1 Helmet by Ufo Plast is a product MADE ENTIRELY IN ITALY. Achieved after long and attentive research resulting in better protection, and can be used in combination with the modern Neck Brace. When planning this helmet particular importance was given to the internal comfort, (fit and ventilation system), to the aggressive and aerodynamic design and to reduced weight. Conceived, realized and optimized for maximum performance with optimum comfort.
For maximum comfort the exterior shell has been constructed in two different sizes and made with the most advanced constructive technology. Different materials have been layered and woven together (Carbon, Aramidic, Fiberglass and Polyester Resin) and inserted in preestablished positions to guarantee the characteristic profile and maximum performance with minimum weight. The particular shape of the inferior shell was studied so as to reduce angles that could collide with the rider’s body and to permit the use of the modern Neck Brace. The visor is fastened and adjusted by 4 anodized aluminium screws.
Warrior H1 Helmet by Ufo Plast has been constructed with a complex ventilation system: the Multi Vent System (M.V.S.). Positioned towards the front are numerous air vents that direct fresh air to the skull, the interior in EPS is canalized for a perfect distribution of the airflow. As heat builds up inside the helmet it is dissipated by 3 vents on the upper part of the helmet which are capable of extraction even with a low flow of air and by two large vents located towards the lower back of the helmet. This guarantees complete air circulation.
Realized in the finest materials the pads are fastened to the helmet with snaps and can be completely removed. There are three pads: central pad, left side pad, right side pad.
Product IMAGES
Follow us on
