MTA6273
MTB Universal hand guards
MTB Universal hand guards
MTB Universal hand guards, two colors available
Made in Italy
MTP6190
Ultralight All Mountain Knee-Shin Guards
Ultralight All Mountain Knee-Shin Guards
The Ultralight Knee-Shin Guard - which lives up to its name due to its reduced weight - is extremely protective and ergonomic.
A special layer of polystyrene, used as an absorbent, is combined with a lycra band at the centre to guarantee better adherence of the knee-Shin guards. An elastic band with a Velcro tab ensures optimal fastening.
Made in Italy
MTP6189
Prokop Air Knee-Shin Guards
Prokop Air Knee-Shin Guards
Air Knee-Shin Guards DH-FR-BMX Air, with internal embossed to increase air flow.
Made in Italy
MTP2277
Ultralight Bodyguard
Ultralight Bodyguard
Bodyguard for Down Hill, Free Ride e BMX, made with Net and Airnet material, super light weight for great performance.
Made in Italy
Back Support: Approved CE-EN1621-2 LEVEL 2
Shoulders & Elbow Guards: Approved CE-EN1621-1
• Polyester net
• Airnet
• Internal protection in STF (SAS-TECH FOAM)
• Maximum lightness
• Maximum transpiration
• Increased elasticity to absorb shock
Warrior "The Alien" Helmet
CODE
MTHE007
SIZES
XS - S - M - L - XL - XXL
COLOURS
K
Homologation E11 - 22R-050158/8
Warrior H1 Helmet by Ufo Plast is a product MADE ENTIRELY IN ITALY. Achieved after long and attentive research resulting in better protection, and can be used in combination with the modern Neck Brace. When planning this helmet particular importance was given to the internal comfort, (fit and ventilation system), to the aggressive and aerodynamic design and to reduced weight. Conceived, realized and optimized for maximum performance with optimum comfort.
For maximum comfort the exterior shell has been constructed in two different sizes and made with the most advanced constructive technology. Different materials have been layered and woven together (Carbon, Aramidic, Fiberglass and Polyester Resin) and inserted in preestablished positions to guarantee the characteristic profile and maximum performance with minimum weight. The particular shape of the inferior shell was studied so as to reduce angles that could collide with the rider’s body and to permit the use of the modern Neck Brace. The visor is fastened and adjusted by 4 anodized aluminium screws.
Warrior H1 Helmet by Ufo Plast has been constructed with a complex ventilation system: the Multi Vent System (M.V.S.). Positioned towards the front are numerous air vents that direct fresh air to the skull, the interior in EPS is canalized for a perfect distribution of the airflow. As heat builds up inside the helmet it is dissipated by 3 vents on the upper part of the helmet which are capable of extraction even with a low flow of air and by two large vents located towards the lower back of the helmet. This guarantees complete air circulation.
Realized in the finest materials the pads are fastened to the helmet with snaps and can be completely removed. There are three pads: central pad, left side pad, right side pad.
Warrior H1 Helmet by Ufo Plast is a product MADE ENTIRELY IN ITALY. Achieved after long and attentive research resulting in better protection, and can be used in combination with the modern Neck Brace. When planning this helmet particular importance was given to the internal comfort, (fit and ventilation system), to the aggressive and aerodynamic design and to reduced weight. Conceived, realized and optimized for maximum performance with optimum comfort.
For maximum comfort the exterior shell has been constructed in two different sizes and made with the most advanced constructive technology. Different materials have been layered and woven together (Carbon, Aramidic, Fiberglass and Polyester Resin) and inserted in preestablished positions to guarantee the characteristic profile and maximum performance with minimum weight. The particular shape of the inferior shell was studied so as to reduce angles that could collide with the rider’s body and to permit the use of the modern Neck Brace. The visor is fastened and adjusted by 4 anodized aluminium screws.
Warrior H1 Helmet by Ufo Plast has been constructed with a complex ventilation system: the Multi Vent System (M.V.S.). Positioned towards the front are numerous air vents that direct fresh air to the skull, the interior in EPS is canalized for a perfect distribution of the airflow. As heat builds up inside the helmet it is dissipated by 3 vents on the upper part of the helmet which are capable of extraction even with a low flow of air and by two large vents located towards the lower back of the helmet. This guarantees complete air circulation.
Realized in the finest materials the pads are fastened to the helmet with snaps and can be completely removed. There are three pads: central pad, left side pad, right side pad.
Product IMAGES
Follow us on
